The laser level is certainly turning out to be normal equipment on construction sites these days.
The construction industry has been entirely revolutionised by the laser level and specifically the rotary laser level. The entire task of leveling has been appreciably de-risked by the use of high accuracy, self leveling rotary laser levels.
Setting footings level or verifying the positioning of metal forms is nowadays a fairly easy process. The best construction rotary laser levels are truly simple to operate. You take the level out of its protected transporting case and position it on the tripod. You set the instrument roughly level and push the button. The rotary laser level will be available for operation as soon as it has finished its automated leveling routine.
Working a rotary laser level is a simple operation. When turned on the level will work through its automatic self leveling process and when set will begin to emit the laser line. It will continue to do this for as long as it is undisturbed. If the level is knocked it will transmit an audible error signal and quit broadcasting the beam. It will subsequently work through its self leveling procedure and resume sending out the beam after a small delay.
As soon as the laser level is all set then the process of verifying the relative height of footings along with many other constructed components can begin. The process is simple and utilises a special receiver attached on a simple rod. The receiver picks up the thin laser beam and produces an audible indication to indicate high/low or level settings. The receiver is clamped to the rod at the precise height. It is then a easy process of taking readings along the footings or brickwork to identify precisely how true it is.
There are a large selection of uses all around the construction site for the laser level.
- Footings
- Pad placement
- Concrete forming
- Depth control for excavations
However crucial tasks like the setting of footings and anchor plates for steelwork are now significantly de-risked with the use of a rotary laser level.
The Rugby series of rotary laser levels from Leica have become the industry standard. They are tough and reliabe and have been designed to operate in the harsh building environment. Leica levels are construction tough and tested to extreme conditions far outside of those experienced in normal use. They are water-resistant as well as dustproof to national specifications and of durable design so they can easily tolerate the normal knocks and scrapes related with this environment.
A rotary laser level currently comes with a range of different features to satisfy the requirements of different facets of the construction and building trades. There are rotary laser levels that are specifically designed for interior operation and those that are for external use. Both types are available with different range capabilities. There are also laser levels with single or dual grading capability. Grading is another term for slope so a laser with grading capability can be used to be sure that the required inclines are achieved. Rotary laser levels may also be used to provide the reference for machine control for excavators.
Errors caused by bad measurement are becoming a thing of the past thanks to the use of the rotary laser level.. The rotary laser level has become the reduced risk solution thanks to its simple one touch operation. Rotary laser levels are designed to be sturdy enough to survive the harsh construction environment.
